H2
The VGSH 2000 steel parapet is a modular design and consists
of 4 or 5 horizontal rail sections located to supporting
posts at a heights of 1.250m and 1.8m. Rails can be pulled to a radii
of 75m on site without the need and cost of specialised curving
and accommodate a vertical alignment of +/- 6 degrees
without modifications.
The VarleyGuard steel parapet is a modular design consisting of 3
horizontal rail sections located to supporting posts. Post
spacing's are at 2m centres. The centre rail utilises a ‘W’ beam
so that it can seamlessly connect to the most common form of
safety barrier. The system can be surface mounted
onto cast in anchorages or driven into the soil.
Material
Steel
Containment
H2
Working Width
W1
System Height
1.25
Post Centres
2m
The VGAH 2000 aluminium parapet is a modular design,
consisting of 4 horizontal rail sections located to supporting
posts. The system is 1250mm high and is made from special
grade aluminium to meet the demands of the
larger vehicle.
Material
Aluminium
Containment
H2
Working Width
W3
System Height
1.38m
Post Centres
2.50m
Material
Steel
Containment
H2
Working Width
W3
System Height
1.25m - 1.8m
Post Centres
2m
